WE CREATE YOUR OWN
PRODUCT SOLUTION !
HOME
WHY VENTING?
VENTILATION ELEMENT
PRESSURE ELEMENT
INDIVIDUAL ELEMENTS
THE WORLD
SMALLEST
PRESSURE BALANCE ELEMENT
Why Venting?
Prevention of differences in pressure or temperature as well as water condensation
A sudden decrease in temperature can cause negative pressure inside the protective nousing of a technical device. As a result, water and dirt can potentially penetrate the seals and damage the electronics. VAYU®TEC pressure balance elements featuring patented IQ TEX® technology offer a highly enhanced air flow. At the same time, the innovative waterproof design protects against dirt and foreign objects.
AIRFLOX INCREASED BY A FACTOR OF UP TO
1000 OWING TO PATENTED TECHNOLOGY
IQ TEX® is the first and only ventilation element worldwide to be permeable to air and to become absolutely watertight as needed. The heart of IQ TEX® is a specially developed fleece which has special superabsorbent substances between the fibres. These are capable of explosively increasing their volume by a factor of up to 600 as soon as they come into contact with water. The initial stateis quickly regained when it dries
As long as IQ TEX® stays dry, a continuous exchange of air is taking place. If IQ TEX® gets wet the air permeable gaps between the fibres are closed as the superabsorber expands. In this state IQ TEX® is watertight, even under high pressure. The absorber contracts while drying and breathability is regained
after approximately 20 minutes. Breathability of the material is similar to that of a cotton T-shirt. This cycle is indefinitely repeatable without aging the material.
IQ TEX® turns conventional textiles into intelligent high-tech companions: permeable to air, breathable or watertight as needed. Whether for shoes or clothing, headgear or for pressure equalisation in electronic components. For the ventilation of control cabinets, windows, doors, lamps and much more – the possible applications of IQ TEX® are practically unlimited.
Sole Chip
Ventilation element for shoes.
Dimensions:
Typical airflow*:
Water entry pressure*: >
Material:
62.0 x 30.5 x 8.0 mm
70 l/min - 0.25 bar
165 l/min - 1.00 bar
3 bar
TPE black
Textile + Technical Chip
Ventilation element for shoes,
textiles for protective housings of technical devices.
Dimensions :
Hard and soft versions
Typical airflow*:
Water entry pressure*:
Material:
27.5 X 27.5 X 2.5mm
39 l/min - 0.25 bar
88 l/min - 1.00 bar
> 4 bar
PA6GF15 black; (alternatively in TPE black)
Tabletten Chip
Ventilation and pressure balance element for all technical fields.
Dimensions:
Typical airflow *:
Water entry pressure*:
Material:
D16.5 X 15.5 X 4.0mm
39 l/min - 0.25 bar
88 l/min - 1.00 bar
> 5 bar
Bayblend T65 black
M6 X 0.75 with A/F 10
Dimensions:
Typical airflow*:
Water entry pressure*:
Temperature range:
Material:
M6 X 0.75) X 16.5 mm X SW10
6,5 l/min - 0.25 bar
16,5 l/min - 1.00 bar
> 6 bar
-40°C/+ 110°C
PA6GF15
M10 X 1.0 with A/F 14
Dimensions:
Typical airflow* :
Water entry pressure *:
Temperature range:
Material:
M10 X 1.0) X 17.0 mm X SW14
19,5 l/min - 0.25 bar
43,5 l/min - 1.00 bar
> 6 bar
-40°C/+ 110°C
PA6GF15
INDIVIDUAL PRODUCTION BY CUSTOMER.
WE CREATE FOR YOUR VERY OWN PRODUCT SOLUTION!
Our goal is your goal. My desire is to be produced forms:
- economically
- functional
- and quality
have to be.
To meet this requirements, we can supply the right moulds for your production.
Our range of services extends from the development, design and production of injection/silicone casting moulds, tool revision, model construction and prototyping to the testing of small series and pilot runs in our in-house technical department.
